BW Technologies MicroClip XT Manual de usuario descargar pdf (Pagina 19)

GasAlertMicroClip

Activating the Detector

Note

Users can enter a 2-line message, up to a

maximum of 25 characters per line. The message

appears on the LCD after the detector version

displays. This option is disabled in the factory

settings. The message can be enabled or changed

in the Sensors tab in Soft Tools. See

GasAlertMicroClip Soft Tools instruction sheet.

Sensors and Power Test

4. The detector then tests the sensors.

Alarm Setpoints

3. Next, the LCD shows the TWA, STEL, low, and

high alarm setpoints.

Note

The alarm setpoints on a shipped detector may

vary by region. See

Resetting Gas Alarm Setpoints.

A screen then appears confirming that the test was

successful (TEST OK) or which sensor(s) failed the

test (e.g., ERROR H2S) before continuing with the

self-test.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 56 57

Sin comentarios

BW Technologies MicroClip XT Manual de usuario Pagina 19