BW Technologies MicroClip XT Manual de usuario descargar pdf (Pagina 45)

GasAlertMicroClip

Maintenance

3. Remove the two screws on the PCB and remove

the PCB.

Table 11. Replacing a Sensor or Sensor Filter

Item Description

1 Front shell

2 LEL sensor

3 PCB

4 PCB screws (2)

5 Rear shell

6 Machine screws (6)

7 Sensor filter

8 O

sensor

9 H

S sensor

10 CO sensor

11 Sealing rib

Note

Ensure the battery does not get damaged once the

PCB is removed.

4. Remove the old sensor filter or slide/pull out the old

sensor(s).

5. Insert a new sensor filter or sensor(s).

Note

When inserting a new sensor filter, ensure the

white side is facing the sensors (i.e., the black side

is facing out).

Detectors that are configured for 1, 2, or 3 gases

may contain a dummy sensor in one of the four

sensor locations.

1. Deactivate the detector.

2. Remove the six machine screws on the rear shell

and remove the back cover.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 56 57

Sin comentarios

BW Technologies MicroClip XT Manual de usuario Pagina 45