BW Technologies MicroClip XT Especificaciones descargar pdf (Pagina 21)

GasAlertMicroClip XT

Technical Reference Guide

Pushbutton

Table 5. Pushbutton

Pushbutton Description

• To activate the detector press C.

• To deactivate the detector, press and hold C until the OFF countdown is complete and the LCD

deactivates.

• To view the TWA, STEL, and peak (maximum) readings, press C twice. To clear the TWA, STEL,

and peak readings, press C when the LCD displays RESET.

• To initiate calibration, deactivate the detector. Press and hold C while the detector performs the

OFF countdown. Continue holding C while the LCD briefly deactivates. The LCD reactivates and

then begins the CAL countdown. Release C when the CAL countdown is complete.

• To activate the backlight in normal operation, press C.

• To acknowledge latched alarms, press C.

• To acknowledge a low alarm and disable the audible alarm, press C (if the Low Alarm Acknowl-

edge option is enabled).

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 73 74

Sin comentarios

BW Technologies MicroClip XT Especificaciones Pagina 21