BW Technologies MicroClip XT Especificaciones Pagina 45
- Pagina / 74
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
GasAlertMicroClip XT
Technical Reference Guide
34
Clearing Gas Exposures
a Caution
Follow all safety procedures as defined by your employer.
Confirm with your supervisor before clearing TWA and STEL
alarms.
To clear the TWA, STEL, and peak exposure readings, press C when
the LCD displays RESET.
Gas Alarm Setpoints
Gas alarms are activated when detected gas concentrations are above
or below the user-defined setpoints. Gas alarms are described below.
Table 9. Gas Alarm Setpoints
Alarm Condition
Low
Toxics and combustibles: Ambient gas
level above low alarm setpoint.
Oxygen: Ambient gas level may be set
above or below 20.9% (or 20.8%).
High
Toxics and combustibles: Ambient gas
level above high alarm setpoint.
Oxygen: Ambient gas level may be set
above or below 20.9% (or 20.8%).
TWA
Toxi cs only : Accumulated value above
the TWA alarm setpoint.
STEL
Toxi cs only : Accumulated value above
the STEL alarm setpoint.
Downscale
Toxi cs only : If sensor reading is
negative (half of the TWA setpoint)
Multi-gas Two or more gas alarm conditions.
Over Limit (OL)
OL displays when readings are above
or below the sensor detection range.
Refer to Specifications
for detection
ranges.
- Technical Reference Guide 1
- Table of Contents 2
- Title Page 7
- List of Figures 8
- List of Tables 10
- GasAlertMicroClip XT 11
- Cautions 14
- Getting Started 18
- Display Elements 20
- Pushbutton 21
- Activating the Detector 22
- Startup Message 23
- Alarm Setpoints 23
- Sensor and Power Test 23
- Automatic Zero and O 24
- Calibration (optional) 24
- Last Bump Test Failed 26
- Force Bump (optional) 26
- LOW BAT dis 27
- Deactivating the Detector 28
- Installing Fleet Manager II 29
- Detector Identification 32
- Sensor Configuration 33
- Calibration Gas Concentration 34
- Calibration Interval 34
- STEL Alarm 36
- STEL Interval 36
- Auto Zero on Startup 36
- User Options 37
- Force Bump When Overdue 39
- Language Menu 41
- Computed Gas Exposures 44
- Viewing Gas Exposures 44
- Clearing Gas Exposures 45
- Gas Alarm Setpoints 45
- Factory Gas Alarm Setpoints 46
- Changing Alarm Setpoints 46
- Stopping a Gas Alarm 46
- Sensor Alarm 47
- Low Battery Alarm 47
- Automatic Deactivation Alarm 47
- Bump Test 48
- Calibration 49
- Calibration Setup 51
- Calibrating with the IR Link 52
- Calibration Procedure 52
- Auto Span 53
- Calibration Due Date 54
- Verification 56
- Datalogs 57
- Event Logs 57
- Maintenance 57
- Battery Cautions 58
- Charging the Battery 58
- Replacing the Sensor Filter 61
- Replacing the H 61
- S, CO, and LEL sensor 61
- Replacing the Oxygen Sensor 62
- Reassembling the detector 63
- Troubleshooting 64
- Startup Troubleshooting 67
- Calibration Troubleshooting 68
- Specifications 71
Husqvarna W3613ETS manuales
Manuales del propietario y guías del usuario para Cortadoras De Césped Husqvarna W3613ETS.
Ofrecemos 1 manuales en pdf Husqvarna W3613ETS para descargar gratis por tipos de documentos: Manual de usuario
Comentarios a estos manuales