BW Technologies MicroClip XT Especificaciones descargar pdf (Pagina 27)

GasAlertMicroClip XT

Technical Reference Guide

Self-Test Pass

When the detector has passed all startup self-tests, it enters normal

operation. The LCD displays the ambient gas readings.

The detector automatically begins

• recording the peak (maximum) gas exposure,

• calculating the short-term exposure level (STEL), and

• calculating the time-weighted average (TWA) exposures.

Self-Test Fail

If the following error message displays after entering normal operation,

refer to Startup Troubleshooting

Battery Test

The battery is tested when the detector is activated and continuously

thereafter. A newly charged battery will typically operate for 10-12

hours.

• Battery power is continually displayed during normal operation. If

battery power is low, L and flashes. The detector per-

forms a sequence of 10 rapid sirens and alternating flashes with 7

seconds of silence in between (continues for 15 minutes).

• If battery power becomes critically low, L and

LOW BAT dis-

play. The detector performs a sequence of 10 rapid sirens with 1

second of silence in between (sequence reactivates seven times).

The detector then displays

OFF and the detector deactivates.

Note

If enabled, Confidence Beep and IntelliFlash automatically

deactivate during a low battery alarm. Refer to Confidence

Beep and IntelliFlash.

Backlight

The backlight automatically activates

• during startup,

• when the pushbutton is pressed (then deactivates after 10 sec-

onds), and

• when there is an alarm condition (unless Stealth is enabled).

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 73 74

Sin comentarios

BW Technologies MicroClip XT Especificaciones Pagina 27